Need Help! ZL15S alarm P/S 101 won't clear


Results 1 to 3 of 3

Thread: ZL15S alarm P/S 101 won't clear

  1. #1
    Member
    Join Date
    Apr 2007
    Location
    USA
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default ZL15S alarm P/S 101 won't clear

    Control is the 0-TTB. I tried the PWE=1 power on w/reset but no luck. the alarm is on head 2 side so I'm thinking it somehow needs to be booted on in the head 2? I had both head 1 and head 2 PWE=1 at one point as well, but it only cleared the head 1 memory and still stuck with the alarm on head 2

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2007
    Location
    USA
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: ZL15S alarm P/S 101 won't clear

    had a tech come out to fix it today. apparently there isn't a factory/official solution to this problem. the workaround was modifying the parameter for the program memory size (don't remember specifically what address it was) and that would force the control to clear/initialize the program memory to reformat it for the new memory size. just in case anybody else has an issue like this.



  3. #3
    Member
    Join Date
    Mar 2018
    Location
    Brazil
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: ZL15S alarm P/S 101 won't clear

    Send me in private message all parameters and PMC parameters.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ZL15S alarm P/S 101 won't clear

ZL15S alarm P/S 101 won't clear