Need Help! Mori NL-2500SY mill capabilities


Results 1 to 2 of 2

Thread: Mori NL-2500SY mill capabilities

  1. #1
    Registered
    Join Date
    Apr 2016
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Mori NL-2500SY mill capabilities

    i am trying to mill in spanner wrench pockets in a Mori NL-2500 with Mitz control and am running into a roadblock. my software doesn't have advanced milling so i'm trying to mod a program a 2 axis program and am getting a P33 format error. i have no issues doing 2 axis milling, but i'm trying to ramp down in Z-0.119, while rotating the C axis 53.6 degrees. here's the 2 axis i'm trying to modify;


    M45 (MAIN MILLING MODE)
    G28 H0
    N2 (MILL FACE 5MM MILL)
    G0 G28 V0
    G0 T24301 (.1965 (5MM) END MILL )
    G97 S3000 M13
    G98 G0 G54 Z5.0 M8
    X1.675
    C0
    G112 (POLAR ON)
    G1 X0.4664 C0.3163 F50.0
    G1 Z0.05 F50.0
    Z-0.119 F9.4
    X0.5466 C0.2824 F18.7
    X0.617 C0.2435
    X0.6763 C0.2002
    X0.7237 C0.1534
    X0.7581 C0.1038
    X0.779 C0.0524
    X0.786 C0.
    G1 Z0.05 F50.0
    G1 X-0.7811 C0.0438
    Z-0.119 F9.4
    X-0.7625 C0.0955 F18.7
    X-0.7302 C0.1454
    X-0.685 C0.1928
    X-0.6275 C0.2367
    X-0.5588 C0.2764
    X-0.4802 C0.3111
    X-0.393 C0.3403
    G1 Z0.05 F50.0
    G1 X0.3147 C-0.3601
    Z-0.119 F9.4
    X0.2159 C-0.3779 F18.7
    X0.1133 C-0.3889
    X0.0086 C-0.393
    X-0.0962 C-0.39
    X-0.1993 C-0.3802
    X-0.2988 C-0.3635
    X-0.393 C-0.3403
    G1 Z0.05 F50.0
    G113 (POLAR OFF)
    G0 G28 V0
    G0 G53 X0. Z5.0 M5
    M9
    M46 (TURNING MODE)
    M1

    is what i'm trying to do possible or am i wasting my time?

    thanks in advance!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2017
    Location
    United States
    Posts
    1
    Downloads
    9
    Uploads
    0

    Default Re: Mori NL-2500SY mill capabilities

    You may just need to add a G17 before the G98 line. Assuming you're using a 90deg live tool. G17 for XY plane and G18 for XZ plane I think. Something like this...


    ( OPERATION 3, MILL CONTOUR )
    ( TOOL POSITION 1, .5 DIA. ROUGH ENDMILL )
    ( 90DEG HOLDER--YG X-POWER 1/2" ROUGHING STUB ENDMILL )
    N4
    G54
    G30U0.V0.W0.
    G0G54G28B0.
    G0T0102
    M45
    G0G28H0.
    G0C0.
    G97S1910M13
    G17U0.V0.
    G0G98Z.11C0.M8
    X6.8279
    Y.0794
    M68
    M98P120
    M69
    G0X6.8279Y.0794C-180.
    M68
    M98P120
    M69

    I'm just an INTP searching for my playground...


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori NL-2500SY mill capabilities

Mori NL-2500SY mill capabilities