Hi all.This is reza.I work on machine CL-203 which uses NC system type MSG-803.The machine has loader which electrical control panel has been installed upon the main electrical panel of machine.The AUX1 output port of the main NC system connected to monitor case and use of it I can see the program of The PLC of main machine.But the AUX1 output port of the loader section is connected to handy console.The handy console can not display the PLC program of loader section or may I make a mistake could not see the PLC program.The model and type of handy console is:
Mori seiki MSC-803,type=E77006B04.Could anyone tell me a simple way to see the PLC program of the loader section.Thank's.