MSG-803


Results 1 to 2 of 2

Thread: MSG-803

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    Iran, Islamic Republic Of
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default MSG-803

    Hi All.This is reza.
    I use a NC system type MSG-803.After many times the system could not boot up,I found there is problem with the CPU of the main board.Could you please tell me,how I can purchase another cpu .The specs. of the NC system written on the back of the case is as follow:

    PART NO.= E77090A04 - DESIGN NO. = PA03215-B013 - SER NO. = 532 - DATE = 1999-5 - MORI SEIKI CO., LTD.

    In addition the following words are written on the cpu:

    PA03220-E010 A1
    PD-2114F16S A1 P9401426

    Thank's.



  2. #2
    Member ulihuber's Avatar
    Join Date
    Nov 2005
    Location
    Germany
    Posts
    107
    Downloads
    3
    Uploads
    0

    Default Re: MSG-803

    Hi reza,

    I have a MSG-803 (used) I could offer you. I think it has the same CPU installed and boots up straight away.
    there is a, original flash card plugged in with an OS/2 Mori kernel.

    Uli



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MSG-803

MSG-803