hi all
like a idiot i have gone and got a cnc lath cheep and now i am stuck the chuck when closed tells the machine it is open so i cannot get a run cycle to run
as far as i can see it needs a parameter to change
does eny one have a way of fixing this
thanks
Similar Threads:
WORK ALL DAY PLAY ALL WEEKEND
Hi
I have looked for a switch there does not seem to be one on the front panel or in the back panel.
also i found that if you index to tool 1 it goes to tool 2 is this fixable or do i program around it
thanks for the help
WORK ALL DAY PLAY ALL WEEKEND
WORK ALL DAY PLAY ALL WEEKEND
Hi when i push the peddle to switch it on the light on the panel comes on and the machine goes into a not ready state.
I have got one way of fixing by changing the hydraulic pipes on the machine but it must be a different way of doing it .
The perimeters have just been put back in and all seems to work.
thanks
WORK ALL DAY PLAY ALL WEEKEND
There should be a key switch for the chuck. On my mori i have it around the hydraulic unit
Verstuurd vanaf mijn LG-D855 met Tapatalk
Hi
I fixed the chucking problem all i did was change the pipes on the draw bar unit working now.
So far so still no work been done on the mach i have not been able to program in mdi so i cant set the tools
does some one know why
thanks
WORK ALL DAY PLAY ALL WEEKEND