Need Help! EX357 Turret Index Time Over (R1606.2) SL400


Results 1 to 3 of 3

Thread: EX357 Turret Index Time Over (R1606.2) SL400

  1. #1
    Registered
    Join Date
    Jun 2011
    Location
    Canada
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default EX357 Turret Index Time Over (R1606.2) SL400

    Hi everyone,

    We bought a used SL400, MSC-501 control from an auction. Today we hook it up and got the alarm EX357 Turret Index Time Over. The TRCL light on the panel is blinking. What is the procedure to home the turret? Please help.

    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EX357 Turret Index Time Over (R1606.2) SL400

    You're getting that alarm because the turret is not clamped into its proper position. Solution: in manual mode, index the turret. The turret will then clamp, and the TRCL light will stop blinking.



  3. #3
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6028
    Downloads
    0
    Uploads
    0

    Default Re: EX357 Turret Index Time Over (R1606.2) SL400

    And make sure you have the phase correct and have hydraulic pressure.

    Sent from my SM-T813 using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EX357 Turret Index Time Over (R1606.2) SL400

EX357 Turret Index Time Over (R1606.2) SL400