Anyone have any manuals for this machine, operation, installation, programming, parts list, electrical ladder. Anything would help.
Similar Threads:
I have SL253 full set of manuals for MSG500/Fanuc21iA (circa ~2000). You have not told us your control. But really, you need all those manuals? PDF manuals are not available for most Mori Seiki machines prior to MAPPS3 (~2003 onwards). no one is going to spend a week scanning manuals for you. I can tell you from experience that any [real] CNC machinist could operate and program the machine without any manuals. the machine will be Fanuc 16i/18i/21i and have pre-MAPPS panel (i.e. very basic common stuff). Fanuc 16i/18i/21i manuals provide most general info any operator would need. ladder from another machine will not help you and you would not need that unless there is a fault and then you will need knowledge to know what to do with it. I could provide some info from my manuals if you really need it. But the solution is to get a proper set of manuals for your exact machine directly from Mori Seiki and hire some experienced people who know what to do with it/them/the machine.
Hi There
I'm trying to run up a lathe,
Mori Seiki SL-250B MSC 500
AED0262
Date: 4/1998
Controller: Fanuc 21 Ti
the machine does not have the Fanuc Servo Drive for X axis and Also Turret ( Double Type) and I can not find any data about the code of the original servo drive( what wasn't in the machine's electrical cabinet ).
Is here anyone who can help me to find the part list or the code of original servo drive to buy a new one.
Could you help me, please?
best regards
Russell