it can be 1000 things.
did it happen while the machine was running in auto or at the start of a new day when powered on?
which machine?
which control?
Please help me how to solve this problem.
two days before our machine start to show emg alarm. still i could not find what is the problem there? please tell me your advise...
we check all relays and fuses, some power lines.. we dont understand what happening there...
no any reaction there. while machine switch on, just only show emg alrm
waiting for your reply thanks.
asfar
Sri Lanka
Similar Threads:
- Problem- (ALARM 414 SERVO ALARM) Y-AXIS DETECT ERROR?
- Problem- Daewoo DMV3016 Mill Alarm (Spindle tool clamp/unclamp alarm)
- Need Help!- Mazak QT 15 Alarm 14 Drive alarm z axis
- Need Help!- Fanuc Powermate D Alarm 414 (LV5V Control Power Low Alarm)
- Need Help!- DAEWOO 8 Steady rest pressure alarm, External feed hold alarm
it can be 1000 things.
did it happen while the machine was running in auto or at the start of a new day when powered on?
which machine?
which control?
Could be overtraveled, could be someone hit the estop button on the chip conveyor emptying the chip bucket, could be a power supply. Is it a flashing emg or solid emg on the screen?
try checking the bank of 24v relays next to the yellow control boxes or the 24 volt input. its some kind of power-related fault because the control can't diagnose the error (no alarm). We've had the exact same fault on our Moris a few times and it was fixed pretty quickly. I don't know the solution though, our Fanuc repair people are very secretive. obviously they want to protect their income
A solid EMG means either a pushbutton, or travel limit. This indicates a break in the Estop chain. Can also be caused by incorrect parameter settings on the PMC side.
it happened on our Moris exactly the same way, power on at the start of the day. he said the same thing so its assumed the machine was working the previous day when powered off. meaning nothing was touched or moved so it cant be a pushbutton or limit switch or a changed parameter. it seems to be a fairly common fault on older Moris at least. there are a few other posts on this forum with the same EMG fault
thanks for your comments, still my emg problem is not solve, tomorow i will share with more information regarding the matter. I wish you would help me furhter more..
regards
asfar
check your interlock module,
check your limits switch over travel,
check your magnetic contactor for ready on machine.
check for fuse for the manual control,and the relays,this happen also in our fanuc,we just check the fuse for control panel hope it will help a lot.
Hi!!!
I have a similar problem with a Nakamura Tome TMC-12 Control Series 21-T, this machine was working well, until a technician came to check a vibration in the Z axis servo, apparently it loaded parameters and the machine did not return to work, I have a backup of the machine parameters, I reloaded them, no alarm comes out, but it is in EMG state, I can navigate the menus, but nothing else works (spindle, hydraulic system, turret , move the axes).
Hopefully someone can help me, best regards.
Hi!!!
I have a similar problem with a Nakamura Tome TMC-12 Control Series 21-T, this machine was working well, until a technician came to check a vibration in the Z axis servo, apparently it loaded parameters and the machine did not return to work, I have a backup of the machine parameters, I reloaded them, no alarm comes out, but it is in EMG state, I can navigate the menus, but nothing else works (spindle, hydraulic system, turret , move the axes).
Hopefully someone can help me, best regards.