Where are you located?

[ref772]

This may not be proper forum protocol, if so will the moderator please remove it. It would be interesting to know where the Momus machines and those in various stages of completion are located. There might be one right around the corner and not know it. I am in central Texas. If you don't mind letting us know where you are, please post a response.

[Festus440]

I'm in the Minnesota.
My woodwork is basically done (no doors or cover yet.) It turned out better then I expected.
(My wife bought me a small table saw a couple years ago and I'd even turned it on twice. Once to see the blade spin around and once to cut a piece of wood )

Metal work is at about 70%. Just got my ground stock for the rails yesterday. The parts are not as good looking as some of the examples I've seen here but I'm sure they will work fine.

A couple of the parts I won't do until I get the motors. I'll probably pick up the motors and electronics with my tax refund

[mblount]

I live in Orlando any machinist located here? I am a wanabe but been kind of discouraged after asking forum's what the thought. Burned out and want a new challege been in Countruction 32 years.

[fastpcuser]

Sarasota, FL ...... I have completed mine about year ago.. and just got sherline mill plus going to build new one using THK rails and THK actuator for z axis.

[Upnxwood16]

Minnesota here. About completed with the metal and starting on the wood.

[groswald]

Colorado Springs, CO. Up and running like a champ.

Randy

[cgodwin]

Oregon. I did the metal first, which is all done. I'm just starting on the wood base. I added 12" to the X axis, and 1" height of the X rails to get a little more usable range out of the Z axis. I'm working slowly, so probably another couple months until it is done.

[SpeedyDad]

Arizona here. My machine has been up and running for a couple months now. I use it quite often every week.

[bjesson]

Chandler, AZ

[SpeedyDad]

Chandler, AZ

Woah, wait a minute. Me too. What cross streets?

[ref772]

Anyone in Texas?

[bjesson]

Didn't realize we needed to add our completion status:

Ariozona, first Momus completed March of 2011. Machine paid for itself within 1 week.

Second Momus ETA: March 2012