I bought a Roboform 400 and had a guy in northern Indiana come and train me. He did a bang up job. He came on Sat and we were running the machine on Monday by ourselves. As for manuals have you tried Charmilles tech support?
Our shop bought a Charmilles Isopulse 80 sinker and it didn't come with a manual. Does anyone have a manual for this machine. Not sure what all of the buttons do and not sure how to get it to burn. I did figure out how to touch off with an electrode, but that is about it. Does anybody have one of these machines, or know how to run it? The generator has a 3 axis digital readout built into the machine and is hooked up to a Charmilles E222. I am also not sure how to set the Z axis depth. Please help me out! Thanks
Similar Threads:
- My delta 20 manual has a Cavity mill event but can't find in control
- Anyone know where to find programming manual for Barco MNC/95M controller?
- I have searched gibbscam's manual but i don't find nothing....Help me
- Need Help!- Anybod have a jetmatic Or know where I could find a manual of the codes?
- looking to find a copy of EZ Mill V8 Manual
I bought a Roboform 400 and had a guy in northern Indiana come and train me. He did a bang up job. He came on Sat and we were running the machine on Monday by ourselves. As for manuals have you tried Charmilles tech support?
Jetski (alias Tooling and Engineering Czar)
"I may not have the keys to success.. but I have learned to pick the locks"