what are your molds and what are you casting in to them?
I'm looking for ways to make 2sided molds with sprays/etc that are easily obtainable. I learned casting/molding from tested and they used krylon crystal clear 1303 but the problem is that shipping it to EU costs twice the price-so that is a no go. What can I use? What kinds of paints etc..?
Similar Threads:
what are your molds and what are you casting in to them?
not a lot sticks to silicone (asumeing casting silicone not caulk in a tube) so you can often get away with out any release, but it will limit the life span of the mold
what your poring in to the mold is going to dictate your release, so I need more info to help you
what your talking about is not so much a release, but inmold painting
or is what your saying you need to aply release to make the 2nd 1/2 of the mold so it dosent stick to the 1st
you might try these suply houses for standard release
Alcorplast
Formy silikonowe, silikon do odlewów - P.P.H.U. Kauposil
??? ??? ???????????? ???????? ????! ??????????? ?????? ? ?????????????? ??????,?????? ???????, ???????? ?????, ?????????? ?????, ??????????????? ? ??.
Last edited by Milsimlab; 04-20-2016 at 08:53 PM.