About Wire EDM original in China
Our company (Suzhou Baoma Numerical Control Equipment CO., Ltd), who has been awarded the certificates of ISO9001:2000 Quality Management System and ISO14001 Environmental Management System, is a professional EDM machine manufacturer in China. We can provide various CNC machines, such as Wire Cut EDM (low speed and high speed), small hole drilling EDM machine, ZNC shape forming EDM (EDM Sinker) and so on. We export all the machines at competitive price.
CNC high speed wire cut EDM is the special local products in china, which is widely used in mould industry. It is different from CNC slow speed wire cut EDM which is high price in other countries. The price of low speed wire cut EDM is about ten times higher than high speed wire cut EDM. But on the quality, high speed wire cut EDM can also satisfy the wide customers' demands well. Our high speed wire cut EDM products DK77 series are featured in big taper(sixty degree),high efficiency(120mm/min),good surface finish(less than 1.2μm in three times cutting) ,long travel(1000*2000mm), large thickness(500mm) and good precision(less than 0.012mm).We can sell at least 1,500 sets machines every year. This sales capacity is seldom high in the same field. Thatís all because of low price and high performance of the machine.
if you have interest,pls inform me my e-mail is export-Robin@suzhoubaoma.com