SP3 DIY injection molding guide - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 17 of 17

Thread: SP3 DIY injection molding guide

  1. #13
    Registered
    Join Date
    Oct 2011
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: SP3 DIY injection molding guide

    Quote Originally Posted by Mason Dixon View Post
    Any updates on the clone build?
    I've been working on a 3D drawing of The Small Power Co. SP3 injection molding machine part-by-part based on resizing Hyrum's photos of the machine (I'm assuming the floor tiles are 12-inches square) and learning what I can also from his documents.

    Small Power, from what I can find out, is out of business. Is there any sort of legal problem using this machine as a basis to create a home unit for one's use? I'm 3D drawing the machine (I will apply motion to ensure the thing works properly, on the PC anyway) but will likely alter it in some ways for a build, such as a horizontal plunger assembly.

    I'm posting here to "flush out" ;-) interested persons who might wish to collaborate on developing a machine, one that also might operate via Cayenne and Arduino at some point. Are there knowledgeable people here about injection molding machines? I have read quite a bit, including a couple of professional books, but I have a great deal more to learn and questions to ask.

    Brian Chapman
    Cedar Rapids, Iowa / USA



  2. #14
    Registered Tkamsker's Avatar
    Join Date
    Oct 2010
    Location
    Austria
    Posts
    1189
    Downloads
    0
    Uploads
    0

    Default Re: SP3 DIY injection molding guide

    I might be interested Can help with control but i have to finnisch atc First ,..


    Gesendet von iPad mit Tapatalk



  3. #15
    Registered
    Join Date
    Aug 2017
    Location
    Poland
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: SP3 DIY injection molding guide

    Hi all, I've made injection machine based on this machine. You can check it out. Machine is working but I've got some updates in mind.
    Here is the video:




  4. #16
    Registered
    Join Date
    Apr 2014
    Posts
    363
    Downloads
    0
    Uploads
    0

    Default Re: SP3 DIY injection molding guide

    That is a great molding set up i watched your over molding vid as well it was fantastic thank's for your effort,gave me some good ideas.



  5. #17
    Registered
    Join Date
    Aug 2017
    Location
    Poland
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: SP3 DIY injection molding guide

    Thx InMesh! I've started new thread here DIY injection machine by pinolec



Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SP3 DIY injection molding guide
SP3 DIY injection molding guide