Looking for someone to design simple injection tools for us

[Wargamer]

We are looking for a partner to build simple two-part molds for us to use in our semi-automatic injection press.

The molds would be similar to this:
http://www.injectionmolder.net/ASTM%...%20mold-03.jpg

No cooling, no ejector pins, nothing except perfectly aligned cavities with perfect shut-outs. But we would have more than one simple cavity.

We will be injecting high impact polystyrene (HIPS) and manually de-molding parts.

Besides the tooling work, we would like an acid-etch in order to achieve a nice, matte finish on the parts (but we can always send the final tool out to Mold Tech to do this ourself if this is easier)

We can provide parts in IGES, STEP, Parasolid, STL - whatever you like.

Please PM or reply to get in touch and take a look at our files!

Thanks,
Tony

[Wargamer]

Just FYI - we'll be doing about 8-12 of these per month going forward.

[gabedrummin]

Hi I own a small Houston based tool shop.....I can desgin and make your molds

[BFModel]

Tony,
I would be glad to take a look.
Jim@BFModel.Net
Milford, Connecticut

Thanks,
Jim

[realhao]

Hi, Tony,

http://www.injectionmolder.net/ASTM%...%20mold-03.jpg,

Your links can not be opened. is it possible for you to send it my mail wonssen@realhao.com? We can help you design this simple plastic injection mold.

Hampson

[jetski]

I would love to quote doing the tool design for you. I have been a tool designer for 30 years. I also build and we run them in our plant. We have an edm we could do the texture of a light to heavy depending on draft with it, depending on draft. Let me know if we can help. Progressive Plastics progressive-plastics.net gsilberberg@progressive-plastics.net Tooling Engineer. 765-552-2004

[happyiceage]

Seems interesting, but could not open the JPG.