Mitsubishi Meldas 60S

[BKCOM]

I have new M60s controller but I don'nt known to

tuning parameter.

I read Operation manual, it show me to use para 7

(AUT) in Auxiliary parameter to auto tuning but i

can not do.

Please help me to solve this problem .

thank in advance

Similar Threads:

• Need Help!- Meldas L3 - Mitsubishi
• Mitsubishi Meldas 300
• Mitsubishi Meldas 300-V
• Need Help!- Need help with Mitsubishi CNC MELDAS C64, will pay $1k

[Russell840]

hi there
take a look at this , you need to use magictrs.exe to transfer your parameter on meldas magic monitor and HI-M , transfer parameter.bin from your pc or Floppy to NC card ( meldas magic 64 ) memory and after that it is neccesery to set para #1060 [ setup ] to 1 and reset the pc to config your parameters on magic meldas 64.
Kind regards
russell

[Pete_MP_Mold]

I have Akira-Seiki with Meldas64 but they never gave me any disks with machine. Where can I get that utility?

Pete

[Russell840]

I have Akira-Seiki with Meldas64 but they never gave me any disks with machine. Where can I get that utility?

Pete

Hi there
I think there is nop yet, you can make your own backup file system .
there is several ways to make your own backup from your meldas , for example if you have CD-Rom or Floppy disc reader or RS232 Cable comunication.
frist of all you need to run " Magictransfer.exe" , then selec your external mem or internall memory and select these files to tranfer and have your backup :
"
ALL.PRM
PARAME.BIN
FILESYS.BIN
RREG.BIN
TREG.BIN
CREG.BIN
"
ALSO
"
WORK.OFS
TOOL.OFS
USERPLC.LAD
*******.PRG


regards
Russell