Help! I lost Machine Parameters


Results 1 to 2 of 2

Thread: Help! I lost Machine Parameters

  1. #1
    Registered
    Join Date
    Jul 2017
    Location
    Italy
    Posts
    0
    Downloads
    0
    Uploads
    0

    Unhappy Help! I lost Machine Parameters

    Hi everybody
    I did repair our electronic Card (QX084) of our machine (Maximart VMC1050) with CN Mitsubishi Meldas 500
    Now when we turn on the machine the screen is like this



    Who repair the card says to us: The machine parameters are gone. It happens when you take away the card from the machine and don't have a backup of parameters.

    What we can do???

    Someone can help us? where and how i can find these parameters?

    Thanks to all guys!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help! I lost Machine Parameters-image1-jpg  


  2. #2
    Member
    Join Date
    Sep 2017
    Location
    Bahrain
    Posts
    139
    Downloads
    0
    Uploads
    0

    Default Re: Help! I lost Machine Parameters

    You can restore the data from EEPROM. Do you have the parameter hard copy ? Before loading the data you would have to initialize the NC first



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help! I lost Machine Parameters

Help! I lost Machine Parameters