Need Help! Mitsubishi Meldas 64 parameter backup problem


Results 1 to 5 of 5

Thread: Mitsubishi Meldas 64 parameter backup problem

  1. #1
    Registered
    Join Date
    Nov 2016
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Mitsubishi Meldas 64 parameter backup problem

    Hello Everyone,
    I have Akira-SeikiCNC with Mi645 control. Just recently I lost servo battery power and had to replace them and reset zero orgins on all axis. Since main parameter backup uses the same kind of battery, I amafraid that it may fail soon too. I need to back up currentparameters before replacing battery. Unfortunately I can not sendanything from the control to my PC. I am getting E60 IOP ERR-2message as soon as I try to send anything to PC. I can input or DNC every program from my PC to the control, but can't get it to work the other direction. I tried pretty much every suggestion and the setting that work for other people but can't get a grip on this one.
    Can anyone with better knowledge of Meldas guide me through this problem?

    Thanks for every suggestion,

    Pete

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2014
    Posts
    174
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi Meldas 64 parameter backup problem

    Hello. I don´t think you need to back any of your machine data (parameters, etc) to change your battery. You just need to perform the battery change while your machine is powered on. I am sure there is a battery change procedure guideline somewhere, but it´s quite simple to follow. However, is not a bad idea at all to have all of your machine´s properly backed up. Because there would be other events where you will need to reload this functional archives.

    FLEX



  3. #3
    Member
    Join Date
    Sep 2017
    Location
    Bahrain
    Posts
    139
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi Meldas 64 parameter backup problem

    The drive battery and NC battery arent same. You may cross check the battery voltage on NC unit to check if its okay or not. (3.6V). Also please let me know if its Meldas 60 series or 500 series to guide with the backup and battery replacement process



  4. #4
    Registered
    Join Date
    Nov 2007
    Location
    mexico
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Pete_MP_Mold View Post
    Hello Everyone,
    I have Akira-SeikiCNC with Mi645 control. Just recently I lost servo battery power and had to replace them and reset zero orgins on all axis. Since main parameter backup uses the same kind of battery, I amafraid that it may fail soon too. I need to back up currentparameters before replacing battery. Unfortunately I can not sendanything from the control to my PC. I am getting E60 IOP ERR-2message as soon as I try to send anything to PC. I can input or DNC every program from my PC to the control, but can't get it to work the other direction. I tried pretty much every suggestion and the setting that work for other people but can't get a grip on this one.
    Can anyone with better knowledge of Meldas guide me through this problem?

    Thanks for every suggestion,

    Pete
    hello did you solve the problem of extracting parameters from your meldas? I have that same problem if you could help me.



  5. #5
    metehan's Avatar
    Join Date
    Jul 2018
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Hello everone

    i have a cnc machine fulland 2005 model meldas 60 s. I load bacup from casset. But now mocro program gone and machine not change the tool. Could you please help me.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi Meldas 64 parameter backup problem

Mitsubishi Meldas 64 parameter backup problem