Need Help! Mitsubishi Mill Meldas 300 series control


Results 1 to 3 of 3

Thread: Mitsubishi Mill Meldas 300 series control

  1. #1
    Registered
    Join Date
    Mar 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Mitsubishi Mill Meldas 300 series control

    I started working at a new shop about three months ago. Since I got there this mill hasn't run. First the control was in Japanese after we moved. Then the table would not go operate properly after it was homed. After another round of repairs it is up and running. I am not sure how the canned cycles or the tool changer work. I tried to bore out a burned out hole with a canned cycle to no avail, i could not figure it out. I programmed the circular interpolation line by line by hand and changed tools manually. Is there anybody or anywhere with some sample programs I could see and teach myself what is going on. Thanks

    Similar Threads:


  2. #2
    Member guhl's Avatar
    Join Date
    Aug 2007
    Location
    Russian Federation
    Posts
    793
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi Mill Meldas 300 series control

    what about reloading canned cycles from eprom after initialization?
    PLC I/F -> (1001)()(M) -> parameters -> base -> Fix_P = 1 -> data in/out -> input -> #(4) () -> "input" pushbutton -> PLC I/F -> (1001)()(U)



  3. #3
    Registered
    Join Date
    Apr 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi Mill Meldas 300 series control

    hi I work with the same machine if you post your code I can help you straighten it out. and teach you how to change tools



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi Mill Meldas 300 series control

Mitsubishi Mill Meldas 300 series control