| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mini Lathe Discuss Sherline, Harbor freight and other Mini Lathes here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-19-2009, 11:03 PM
| |||
| |||
Hey guys, I'm new to this forum, and to lathing in general. I purchased a 7x10 mini lathe from harbor freight. Well after milling, and stopping the spin by going too deep with a cut, the motor stopped. popped a fuse. luckily there was a spare, but even with that it will not work? It clicks. If is move the clear cover that hangs over the chuck I hear a relay click. Any info on how to make this work, if did I damage something?? If I did, where can I send it to? Thanks in advance. -FPM    |
|
#3
06-20-2009, 07:06 PM
| |||
| |||
| I did the same thing when I first bought my lathe! I didn't put the chuck cover on and the machine wouldn't work. I almost brought it back to the store, but finally found the safety switch. Glad to hear you found the problem! Dale P. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DRO for Harbor Freight 47158 based on Harbor Freight 93293 Calipers | Temtu | Benchtop Machines | 20 | 05-26-2009 11:29 PM |
| Fanuc Power Supply Internal Fuse Blown | hrhoward | Fanuc | 1 | 01-07-2009 04:42 PM |
| Problem- 0.6 amp fuse blown | highspeedmazak | Tormach PCNC | 2 | 09-05-2008 12:11 PM |
| Problem- fanuc spindle fuse on dc link blown | Nastyzen | Fanuc | 4 | 08-28-2008 11:05 AM |
| harbor freight X2 is now $579? | isaac338 | Benchtop Machines | 30 | 05-13-2008 07:09 AM |
| | |
Linear Mode
