11-20-2006, 02:15 PM
|
| | | Join Date: Nov 2006 Location: Panama
Posts: 1
| |
feed control for hardinge TL | |
Good day everyone
I need to find a feed control for a Hardinge TL model, tool room lathe, the one it had was send to the armature shop but they misplace it (lost it), now I have a very good working lathe accurate up to the thousand and no feed control. I need to find out if the hardinge HLV, some kind of servo system or CNC can work does not mater if it need parts to be manufacture to adjust the feed control. This machine is from the 50’s so the hardinge company have no parts, is obsolete according to them but compare to the new manual generation of tool room lathe I rather keep this one. Thanks for any advise. |
Linear Mode
