Atlas Craftsman 6" lathe mod. 109 21270

[Cropduster]

It runs and seems to work. I have the original manual if any one else needs one. I have the original tool post and one 1/4"X1/4" cutter. I think this is a 6" lathe. I need any info. like year of manufacture.
Need 5/16 wide X 1/2" tall, right, left & straight, tool holders and 1/4"X1/4" cutters and many other things that I'm not aware of yet. :-).

[NC Cams]

Check out the Crafstman lathe user group. Pretty sure it is on Yahoo

[sidlsch]

i just purchased one of these older craftsman mini lathes, your post says you have an owners manual. could you kindly scan it and email it to me? sidlsch@hotmail.com.
thanks,
sid schroeder

[Bob L]

It runs and seems to work. I have the original manual if any one else needs one. I have the original tool post and one 1/4"X1/4" cutter. I think this is a 6" lathe. I need any info. like year of manufacture.
Need 5/16 wide X 1/2" tall, right, left & straight, tool holders and 1/4"X1/4" cutters and many other things that I'm not aware of yet. :-).

Hi cropduster,
I'm new to the site but looking for any help re 6"Atlas lathes. I would appreciate if you could scan & e-mail me a copy of the manual.
I have quite a collection of machine parts as I acquired 3 lathes (in boxes). One I have re-built (Southbend 10) & have parts for a Southbend 9. I am now trying to make sense of all the bits that came in a box for the 6" Atlas for my son.
On the Atlas the only info I have is stamped on the bed & is M3956.

[Twmaster]

The model 109 Lathe is not made by Atlas. It was made by the AA (Pronounced 'Double A') Dunlap Company While similar in size to the Atlas made machine there are no other similarities or parts interchangeability. The 109 was designed to be a cheap machine. There are a couple of Yahoo groups dedicated to the model 109 series of lathes.

[Cliff. Johnston]

Our club has a 6" Atlas lathe with lots of accessories but no manual. If someone can copy a manual for us I'd really appreciate it

Thanks,

Cliff.

[Twmaster]

You can get the nicely copied manuals for the Atlas 101 on FeeBay for around $10 shipped.

[AR1911]

I have scanned manuals for several of the small Atlas and AA lathes at home.
email me at burkheimer @ gmail.com and tell mewhat model you have.

Also, for the 109-series lathes, check out homeshopsupply.com