Ok, I'll see if I can help out. I use insert tools but looking at them the one on the far left (#1) is a parting or grooving tool. The next 2 (#2 & #3) are left hand and right hand finish turning tools. The next (#4) looks like another left hand turning tool. The next (#5) looks like a facing tool. The next (#6) looks like a wide grooving tool but I think you would struggle with chatter if you used this one straight. The next (#7) looks like an external thread cutting tool. The next (#8) looks like face roughing due to the negative rake. The next (#9) looks like a roughing tool for turning, once again due to the negative rake.
The last 2 (#10 & #11) are boring tools.
As I said I don't use these particular types of tools so I'm only going on the tool shape in the picture.
Hope this helps