Should I get a homier 7x12

[CNCadmin]

I got mine on Ebay for 299.00

[edge]

I dont get it. The Grizzly and Homier seem virtualy identical.

You might check out this link for more info on the different versions.

http://www.mini-lathe.com/Mini_lathe...s.htm#Versions

[James04]

Thanks Edge,

I had been to that site but must have overlooked that section.

Paul,

Nothing good on E-bay. I won't hold my breath. Im going to see if Homier has any stock.

Thanks for the help
James

[James04]

CNCadmin,

How long ago did you get your Homier lathe? If it was recent what size tools does it use 5/16 or 3/8? I woudl like to order some turning tools but am unsure of what size to get. Any advise on an inexpensive source for tool bits/drill chuck with MT2/ and live center?

Thanks
James

[CNCadmin]

I think 3/8" is alittle to big, but you could always change the holder.

[WOODKNACK]

Look at this web site . they have everything for the mini lathe and mill!
www.littlemachineshop.com

[CNCadmin]

Originally posted by WOODKNACK Look at this web site . they have everything for the mini lathe and mill! www.littlemachineshop.com

That is one great place to get all you need, just give him a call he is very knowledgable. Tell Chirs Wood CNCzone sent you.