| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Milltronics Discuss Milltronics Machines |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-17-2009, 04:23 AM
| |||
| |||
Machine was working OK untill we had a power outage, now machine won't work. Powers up, but screen is blank. Controller won't work. I noticed the power supply wasn't working. I pulled it out to check it, and it worked fine. Reinstalled it, and it shuts down. On the buss bar there are three 5 volt wires to the main board that are getting .4 volt feedback to the power supply, and making it shut down. Help.    |
|
#2
10-31-2009, 05:52 PM
| |||
| |||
I pulled the whole controller out, and it is now for sale. Cheap. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with a Milltronics VKM3 Centurion 6 | WrenK | Milltronics | 14 | 11-23-2010 10:33 AM |
| Milltronics Centurion 1 Software & Manual | TZ250 | General CNC (Mill and Lathe) Control Software (NC) | 1 | 07-01-2010 12:44 PM |
| mastercam x3 to centurion 7 milltronics | motor-vater | Post Processor Files | 2 | 05-30-2009 02:17 AM |
| Milltronics Centurion 4 amp capacitor | ozturbo | Milltronics | 14 | 10-30-2008 02:06 PM |
| Milltronics Centurion Six | CUTRITE | Milltronics | 10 | 10-13-2006 02:48 PM |
| | |
Linear Mode
