Scaling down with a Cent. 7 - CNCzone.com-The Largest Machinist Community on the net!

kokeman · #1 05-29-2009, 11:30 PM

I programmed and made a full size part. Now I need to make a sample that is 1/3 size. I can not get the scaling option to work in conversational. Has anyone done this?
Kokeman

RWhite · #2 06-04-2009, 02:13 PM

Yes

kokeman · #3 06-04-2009, 05:36 PM

I was trying to figure out how it works smartass. What do you do you use for values to get 2/3 size?

RWhite · #4 06-04-2009, 06:34 PM

If you have a part that is 1=1 and you like it
you can scale it up or down from the scale menu us .75 for 3/4 = 1
use .666 scale factor for 2/3 use .500 scale factor for 1/2 if you use 1.5 you will get a part that is 1 1/2 larger

kokeman · #5 06-04-2009, 10:18 PM

thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
network card for Cent 7?	panaceabea	Milltronics	2	01-29-2009 12:54 AM
Subroutine on Cent 4?	Brian FRF	Milltronics	0	10-15-2008 12:15 AM
need networking help cent 1	adam12000	Milltronics	0	01-07-2008 07:57 PM
Cent 4 on partner 7 VMC	smts	Milltronics	0	12-19-2007 12:29 PM
cent 6 I/O	HANSENTECH	Milltronics	4	12-03-2006 05:27 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)