| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Milltronics Discuss Milltronics Machines |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-21-2009, 10:18 AM
| |||
| |||
I need help programming some parts with radii's on a lathe with a cent v controller. Can someone help me out? Thanks Joe    |
|
#3
05-22-2009, 11:54 PM
| |||
| |||
| Yes conversational. |
|
#4
05-23-2009, 09:53 AM
| |||
| |||
JOE, EVENT #1-PROGRAM START EVENT #2-MISC-CALL WORK COORD#1 EVENT #3-TOOL CHANGE OR CALL EVENT #4-POS-X4.500 Z0.000 (RAPID) EVENT #5-POS-X0.000 (FEED) FACING EVENT #6-POS-X4.500 Z.125 (RAPID) EVENT #7-TURN RUFF (ENTER VALUES FOR FINISH,RUFF AMOUNT & START POINT, & ETC) EVENT #8-LINE X1.470 Z.125 EVENT #9-LINE Z0.000 EVENT#10-ARC CCW XCENTER-0.000 ZCENTER-2.250 XEND-4.400 ZEND-(-)1.250 EVENT#11-LINE Z-2.125 EVENT#12-END HOPE THIS HELPS LYN |
|
#5
05-23-2009, 10:40 PM
| |||
| |||
| Thanks Lyn! I will give this a try. Joe |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| programming a radius | honda27 | G-Code Programing | 3 | 10-31-2008 09:25 AM |
| From Radius to Diameter Programming | metx | Fanuc | 7 | 04-10-2008 02:04 PM |
| Programming a radius | fukeneh | G-Code Programing | 8 | 07-13-2007 10:35 PM |
| programming radius/ help needed | integrexe410 | Mazak, Mitsubishi, Mazatrol | 6 | 12-11-2006 01:14 PM |
| Programming lathe with radius numbers | mudwhump | BobCad-Cam | 1 | 06-07-2004 08:14 AM |
| | |
Linear Mode
