centurian IV parts avalible

[nchapin]

I recently replaced the Centurian IV controls on my Partner III mill, as a result I have several Centurian parts left over.

The main process board
X,Y,Z boards
several I/O isolator cards
various plugs
some manuals

The monitor, keyboard, tape drive and local switches are gone already, sorry.

If anyone can use these parts they are avalible for the asking, if you help with the shipping costs.

Norm

PS the Geckodrive G100 works great.

[Brian FRF]

I recently replaced the Centurian IV controls on my Partner III mill, as a result I have several Centurian parts left over.

The main process board
X,Y,Z boards
several I/O isolator cards
various plugs
some manuals

The monitor, keyboard, tape drive and local switches are gone already, sorry.

If anyone can use these parts they are avalible for the asking, if you help with the shipping costs.

Norm

PS the Geckodrive G100 works great.

Is this everything inside the big box on the back of the mill?

Ive got a cent 4, and would like to have spares for it (figure have spares, wont need theory)

[nchapin]

These are the electronic parts in the big box on the back of the mill. I reused the electrical parts (relays, fuseblocks, etc.).

I also have the old three phase varable speed drive that was mounted on the side of the machine. I could never get it to work, the manufacturer was out of business and I have no documentation for it.

Let me know if you want any or all of this 'cause it is currently cluttering up my garage.

[Brian FRF]

Yes, Id like to pick those up. I dont think I want the variable drive though.

How much? And if you can box up, I can send UPS on my account to pick up the package.

Also, Im assuming all these boards were working when pulled off, you just went to a different drive/control system?

[nchapin]

I was having problems communicating with the Centurian system from the tape drive or the keyboard and so changed to the PC based system. I'm currently using Mach 3 to communicate with the Geckodrive.

The parts are free if you want them. I'll get them packaged for shipment.

Send me an email at nbchapin@msn.com with your shipping information and I'll get the parts out to you.

[nchapin]

I have shipped off the parts so none are avalible.