bobcad post for centurion 5

[Joe Miranda]

Does anybody have a BobCAD V22 post for centurion 5 control.

Thanks

Joe

[JL Fabrication]

you can download it from the bobcad website. I am currently using it for my centurion one control.

Jason

[Joe Miranda]

Jason,

I only see Centurion VI posts. Is that what you are using and if so did you have to modify it?

Joe

[JL Fabrication]

here is the link there is two posts one called centurion V the other called centurion 5 ot sure of the difference.
http://s229444871.onlinehome.us/bobc...dsupport/posts

jason

[JL Fabrication]

Joe just realized you are probably looking for the lathe post these are for the mill.

Sorry

Jason

[moldcore]

When it comes to postprocessors is there any difference between the 5 & 6 or 7? We have been using the Centurion V postprocessor with Surfcam for both controllers for over 7 years and haven’t seen any problems. I recall at the time we received the Cent. 6 machine (VM24) that we didn’t need anything different from Surfcam, if it worked in Cent. V controller it would work with the 6. Surfcam has never released a Centurion 6 or 7 post that I know of.

[Joe Miranda]

Jason,

Thanks. I was looking under milltronics in the bobcad site. Now I see that they are under Centurion. I am looking for the lathe post.

Joe