| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Milltronics Discuss Milltronics Machines |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-19-2007, 11:29 AM
| |||
| |||
attempting to retro old Yaskawa spindle drive with Baldor...cannot get spindle to run in auto. Noticed that spindle enable output on pc is not on which is supposed to enable the drive. Any Ideas as to what events need to occur for this output to come on...not finding it in the drawings or prints  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Proper tool setting, Cent 6 and 7 | garnetram | Milltronics | 8 | 12-04-2007 09:00 PM |
| Cent.4 wont read I or J help | Jeff S | Milltronics | 4 | 03-30-2007 01:35 PM |
| cent 6 I/O | HANSENTECH | Milltronics | 4 | 12-03-2006 04:27 PM |
| Cent 7 Program an elipse?? | out**cold | Milltronics | 1 | 10-25-2006 08:33 AM |
| Seventeen cent grab bag | MrWild | Stepper Motors and Drives | 1 | 03-21-2006 10:34 PM |
| | |
Linear Mode
