Milltronics parts

[truckwiz]

Hi,
I'm looking for a axis controller board for a partner 1 mill, Millltronics says the one I have is obsulete.

Thank's
Brian

[Dave1]

The board in the computer? (Inside the big black box) or is it one of the boards in the lower right of the cabinet, possibly blue in color perhaps? I have 3 of the blue ones (1 is weak) if that is what you need.
Dave

[truckwiz]

Hi dave ,
It's one of the boards in the lower right corner, My are green .

Brian

[milltronicsmark]

truckwiz

You need to check out this site and talk to Tomas Moran . He sells a Servodynamics replacement card for the Glentek 370. It's a blue card to insted of green. SDFPO 1525-17

www.cncpartsdept.com/z_newparts_SDdrive.html

Mark

[truckwiz]

Hi,
Ya , dave1 had 3 boards but my machine was one of the rare ones that had IMS corp drivers. I found one on ebay and should have it monday . I'll let you know if it works out.

Brian

[truckwiz]

Mark,
nice looking drives , I'm going to call him monday to see how much to change it over.

Brian

[truckwiz]

Hi,
Driver from ebay look's like it was in a fire , couldn't get any kind of answer out of www.cncpartsdept.com . I orderd drivers from from Milltronics (I love there tech support , If I could afford a new machine I would buy one from them !).

[Dave1]

To bad about the ebay find, it's always a crap shoot there. If ya need a hand you know the number,

Dave

[truckwiz]

Installed new glentech boards , works AWSOME ! Thanks for the help

Brian

[bikermachine]

Looking for someone that knows the computer guts of a Milltronics 3 axis CNC Knee mills.

[trevj1]

Which model? Controller, that is.

I've got good help here. Need Model, and some description of the issues, to get help, though.

Cheers
Trev

[bikermachine]

Well Trev
It is a Centurion control. It is on a Seiki 3V machine from 1996. It will not boot up screen wise or anything. Some guy came in a told them power supply was out..So power supply was replaced. Still NO BOOT. Local machine dealer told me it seems like it needs a new panel 5 Grand...Not happening. The operator that had run them since new said it was the computer (IBM386) that was out. I am told you just can not put in a new mother board and video card. It has to be from Milltronics. The local dealer wants 300.00 to come 15 mile to diagnose. So I am resorting to this. Help me out??? Gerald in Ohio (Bikermachine)