- Problem- Tapping cycles disable
-
Registered
-
-
Member
When someone has a code problem, they usually post the code in question. Without being able to see what you're trying to run, it would just be a guess with respect to a solution.
-
Member
Re: Tapping cycles disable
Hi Popy, the G84 is for soft tapping. This uses a "software algorithm" to compute the tapping. Milltronics also has a "hard / ridged tap" cycle it is G88.
Check the machine manual under G codes for a detailed description. Pages 165 -167 for conversational screens and pages 289 for G84 page 294 for G88 in my manual (C7 7200), pages numbers should be pretty close in the 8200 manual.
If you have the serial # of the machine I can check and see if your machine has the ridged tap option.
sportybob
- Problem- Tapping cycles disable
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules