recommended lubricator oil

[gunmaker]

I walked back into my shop after lunch and my recently purchased RH19B S#9528 manufactured in 2006 was screaming at me. I located the alarm speaker and it was on the side of the auto oiler. I got a half full 5gal bucket of Mobil DTE light with the machine, but no mechanical manual. Not sure if it's the correct oil. I do have some Vactra No. 2 in the shop as well. This machine was used mostly for machining wood (guessing 500-1000 hours total). I wonder if that is why the DTE light was included???

Thanks
James

Similar Threads:

• Hurco BMC4020 CAS Oil Lubricator problem
• Versamatic II Lubricator by Bijur.
• Bijur Mist lubricator
• SV-2412 Lubricator Adjustment
• Auto Lubricator for Tormach

[mactec54]

I walked back into my shop after lunch and my recently purchased RH19B S#9528 manufactured in 2006 was screaming at me. I located the alarm speaker and it was on the side of the auto oiler. I got a half full 5gal bucket of Mobil DTE light with the machine, but no mechanical manual. Not sure if it's the correct oil. I do have some Vactra No. 2 in the shop as well. This machine was used mostly for machining wood (guessing 500-1000 hours total). I wonder if that is why the DTE light was included???

Thanks
James

If it is just for the Way Lube then Vactra No. 2 is what most use

[sportybob]

There is a tag near the oiler that says Mobil Vectra #2 or equivalent.
All Milltronics machines I have seen it is Vectra #2.

Sportybob