Looking for Fastcam and Lathecam

[CPG]

Hello,
Somewhat new to the forum, purchased some older machines. I am looking for Fastcam part number 9999-409 and lathecam part number 8894. Can buy them new, thought someone my have them kicking around.
Thank You

Similar Threads:

• Fastcam Software
• Need Help!- fastcam
• Need Help!- Fastcam How do I chain cut
• I need help with a FastCam issue please
• Looking for a copy of FastCam

[ZZZZ]

You will want to contact the former owners to see if they may have saved the disks or call Milltronics to find out if FastCam/LatheCam was shipped when the machine was orginally delivered. If not, this is copyrighted software, you SHOULD purchase it from Milltronics parts department.

[bmoore]

I have lathecam but I don't know what version it is I think 7200

- - - Updated - - -

I have lathecam but I don't know what version it is I think 7200. I'm looking for fastcam 2.

[KH0UJ]

I think I have a fastCAM, the software cannot run without the USB thumb drive (for piracy protection), too bad I dont use it anymore because I have a better and more detailed program on my CAM programming those are my beginner days, I used it then I found out it lacks commands that I want. good software by the way for starters.

[bmoore]

What version of fastcam is it? The lathecam I have came from a usb but I got it to work with out it. So I should be able to get it to work.

Sent from my SM-G935V using Tapatalk

[KH0UJ]

What version of fastcam is it? The lathecam I have came from a usb but I got it to work with out it. So I should be able to get it to work.

Sent from my SM-G935V using Tapatalk

FastCAM can be downloadable sir, but you need to bypass the software itself because every time you run the software, it will look for the USB softdog. It wont open until you plug it`s USB dongle, it`s like a flash drive but it`s not. but if you can figure out on how to crack it then I think it`s gonna be fine

[bmoore]

I already cracked my cnc software to run on my pc but it won't let me make new programs.

Sent from my SM-G935V using Tapatalk

[bmoore]

Pc not proflie

Sent from my SM-G935V using Tapatalk

[bmoore]

FastCAM can be downloadable sir, but you need to bypass the software itself because every time you run the software, it will look for the USB softdog. It wont open until you plug it`s USB dongle, it`s like a flash drive but it`s not. but if you can figure out on how to crack it then I think it`s gonna be fine

I would be happy to give it a try. I need the files it installs on the computer when you first install it.