cent 6 parts memory

[ihbuilder]

I just had a error 008 insufficient memory . I'm not sure how much parts memory the cent 6 has I've looked through the manuals and couldn't find it This was a CGI machine with very low hrs on it , only things missing : ATC ,auto drawbar and flood . had to change some parms for spindle speed but all in all it's running strong .

[ZZZZ]

If you are getting the error message immediately upon boot-up, go delete some old program files.

If you are trying to load programs, you will still want to delete old files, but you may have time to save everything in Parts storage first, then you can clean house.

If you are trying to load a large program, you may have to load it onto the Ram drive and DNC it from there.

You can see how much Parts storage you have by going to F10-Util, F8-Info, F4-Path where the amount of available is displayed.

[ihbuilder]

thanks ZZZZ , I was loading a large file off the floppy . It loaded alright but would not run . I was trying to save a tool change by holepocketing 64 .28 holes but I changed it around to a drill cycle w/ a .25 and reamed them out and just delt with changing the tool . I'll be glad to get a tool changer for it at least the auto drawbar for now .