ML17 oiler meters?

[isibrigade]

Where do I purchase (besides milltronics) a set of meters for my ML17. Apparently, one of them was installed backwards and my x way was receiving no oil for some time now. . .
I might as well replace them all while I'm at it.
tHANKS

[isibrigade]

Also,
looking to replace the x way felt covers. Milltronics says they are 'discontinued'. Any ideas?
Thanks

[trevj1]

Check a dealer that carries Bijur stuff.

The oiler on our Partner4 is a Bijur. IIRC the oil restrictors are separate from the check valves.

Felt covers? Try some felt and a pair of scissors, or a razor knife.

McMaster Carr should be a good bet for both. The Felt, that is, not the knife or scissors.
MSC? Acklands?

Cheers
Trev

[isibrigade]

Alright,
I found these guys:

http://www.industeq.com/stock/listings.asp?manuId=17

A good source as they only charged about $10 each meter vs. $17-25 that everyone else wanted.

Yeah, I figured the cut-a-felt method would be the one that makes the most sense. THANKS,
-dustin