- Problem- 502: spindle run alarm
-
Registered
502: spindle run alarm
I have problems with controlling mazak Yasnac mx3:
users message
502: Spindle run alarm.
so far, and I could not identify the problem, if I can help it would be helpful
Similar Threads:
-
-
Registered
Re: 502: spindle run alarm
Hi ... My Name is Bob. When you get the error DO NOT HIT RESET... open the cabinet and look at spindle drive display
What is on the display showing?
-
Member
Re: 502: spindle run alarm
Hello bob .. before I showed FU alarm, but I solved it by changing the PROM memories u24 and u23, performing the same as the bridging configuration of pin A-B. With that I removed the alarm but I can not turn the spindle, I have to revolutionize with M3 and in JOG mode, but automatically send me the alarm 502: spindle run alarm and 521: spindle servo pack alarm and in the display of spindle drive no Mark anything.
- Problem- 502: spindle run alarm
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules