INGERSOLL MILL

[boseydon]

I BOUGHT A USED 2 1/4 INGERSOLL MILL WITH INSERTS THAT HAVE 70 DEGREE NOSE ANGLE AND THESE DO NOT SEEM TO FIT ANSI CLASSIFICATION
DON'T KNOW WHAT INSERTS TO LOOK FOR
ANY IDEAS PLEASE
THANKS
ANDREY

[txcncman]

Does it look like this:

NEW INGERSOLL 2-1/4" END MILL 16J1A2281R03 2.250" | eBay

[boseydon]

HI
THANKS
YES IT DOES LOOK LIKE THIS BUT THIS MILL USES CDE INSERTS AS THE SELLER SAYS AND I'VE GOT A 4" INGERSOLL MILL THAT USES CDEs AND THEY DON'T FIT THE MILL IN QUESTION - THEIR NOSE ANGLES ARE DIFFERENT,IT'S 80 DEGR AGAINST 70 DEGR THAT I MEASURED ON THAT 2 1/4"

[txcncman]

Does your mill still have the numbers on it? Send an email to Ingersoll and ask them to research it for you.