Looking for an anodizing company referral!

[MBG]

Thanks for the replies, Gents: I be in Pueblo, CO. and while closer is better, I'll ship wherever gets me the best work/price. The local machine shops are few and....Not very impressive, and I dislike talking to any of 'em, to be candid! The whole reason I got my education to do this m'self was because shops treated me so badly trying to get parts done. It seems when people hear you're designing 'Toy Car Parts', your cred goes El Flusho....When I do a Ti sprocket for a 10" long 40 MPH motorcycle running .1875 pitch chain, the tolerances are exacting! Much more so than their 1:1 counterparts, so why the stigma, I dunno but it's tangible. Thing with R/C stuff is that cosmetics is all-important: I'd say 85% of upgrade parts sold worldwide are purchased for no other reason than that they look Bas-A$$ (I am not immune from this either. ) So I'm looking for a place that is into the aesthetics and not just an industrial anodizer- Purty Sells! Chris

Have you found a supplier? I offer multiple colors.

[Danco]

Danco has the most locations in California. Our plant is located in Arcadia (our headquarter), Santa Ana and Ontario. Our powder coating division is located in Huntington Beach. Danco is opening a 5th location (18,000 sq. ft.) by the end of 2012. Our only out of state location in Warsaw, Indiana specialize in medical anodizing is the largest on the East coast. This makes us the largest multi-location company in the industry of metal surface treatment. The reason we are so big is because we always win every request for quote. If you have taken a commercial airline flight you have seen our work on airplane interiors.