I'd like to ask a hypothetical question to any who has experience anodizing:
Let's assume you have some 6061 parts that are physically longer than your baths. Can you clean, desmut, anodize, dye, and seal 1 half and then flip the part around and repeat the process for the other half and get away with it?
Any insight would be greatly appreciated.
Darn. link got filtered... Still looking.
anodizing101 : Anodizing101
Now it is fixed.
Last edited by neilw20; 07-14-2011 at 03:08 PM. Reason: Fixed link.