Need Help! Looking to get a Coke machine piece chromed

Results 1 to 2 of 2

Thread: Looking to get a Coke machine piece chromed

  1. #1
    Member 34ford's Avatar
    Join Date
    May 2012
    Location
    USA
    Posts
    52
    Downloads
    0
    Uploads
    0

    Default Looking to get a Coke machine piece chromed

    I have a Vendo 44 Coke machine I am restoring and I need the coin plate restored. Any suggestions?



    Similar Threads:
    Dennis


  2. #2
    Member Switcher's Avatar
    Join Date
    Apr 2005
    Location
    United States
    Posts
    3634
    Downloads
    0
    Uploads
    0

    Default Re: Looking to get a Coke machine piece chromed

    I would only go with powder coating.

    Notice on your red door hinge on the left of the machine how the paint is flaking off, powder coat won't do that.

    Make sure the parts are glass bead blasted down to bare metal before powder coating, don't use sand blasting or it could mess up the metal/details because sand leaves a very rough finish.

    Free DXF - vectorink.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking to get a Coke machine piece chromed

Looking to get a Coke machine piece chromed