Hello, I have been trying to increase my skills in parts production and was wondering if anybody in the GTA could help me with some advice and direction to focus my learning. My interest is CNC machining, mostly with a Mill. I recently bought a Lathe and have been rebuilding it. I'd be happy to help out if needed Advice on equipment or a Technology demo concerning what software does what would be also very helpful. I envisage investing a small sum (I'm guessing about $10K on my own hardware as my situation warrants)
Last edited by Dawes; 11-09-2009 at 06:41 AM.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
