I need a mentor who has Vickers Acramatic Control Experience. I have a Cincinnati Milacron Hawk Lathe and I need help to get it running.
Specifically I need to learn:
1) how to use RAP to program on screen.
2) Re-set the X-machine zero
I would like to use MasterCAM X to program and load the posts on the machine. If someone has a good post for Acramatic 2100 and MasterCAM X, please contact me.
Ray, I would like to take a look at the control manual to see if I can help. I have different software. Acramatic experience.
Brian, in San Diego
Been doing this too long