Hello Everyone! I am looking for a mentor, or perhaps just a few friends who already have homemade CNC setups that I can bounce ideas off of. Any experience will do.
Also, I know it's probably out of scope for this forum, but I also wouldn't mind some friends who are into building robotics. PM me if interested!
Last edited by NGinuity; 12-27-2006 at 11:29 AM. Reason: Specify state.
A field trip might be cool to San Antonio, but I generally can't get out of the city much, so I am kind of limited to 1.5 hours away or so :-(
I do appreciate the response, and will keep that in mind!
My shop is in Rockwall, I am in Greenville.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
I live very close to you. PM inbound.
I am in Lancaster,I35E and I20. Have built my own 4 axis machine My site is www.turningaround.org. Call 7days 0800 to 2000 at 972-227-2741
Art, would love to see your shop sometime, and the large lathe...
I am in Gladewater Texas I have a cnc mini lathe and a Shoptask underway. I have solidworks and autocad experience
We started a group in the Dallas metro-area. We have only had our first get together but we all need to start somewhere. Check out: