Seacost New Hampshire?

[KEYTEEM]

shopboy nice to hear from you , welcome aboard. I just got thru checking out your new machine , nice ! I have seen the
original versions before but not any of the newer ones
as in the tripower, can you send us some pics when you receive it ?
NEATman ,cut more, no i haven't done the screws yet, jim
is going to help me , but i am gonna grind off the case hardened rough stuff 1rst with my Lisle 91000 drill grinder
attached to the cross slide of my old 5 pulley belt drive , and i do mean old, lathe that i reserected from the dead.
I will def show some pics before and after-good thing i have an xtra screw for experimenting.

[normd]

Hi;
I'm in Deerfield and am just starting a Retrofit on a Konia-clausing mill. Decided to go with Camsoft lite. I am a true novice at it. I worked in machine shop 30 years ago or so and have alot of automotive background. So this should be fun. The machine was free (cost of moving it) and was somewhat functional but the Dynapath system 10 worked when it wanted to, so it didn't get used. I decided to make it useable . I' have the parts here now and hope to get an eletrical friend into help/check with wiring.

[cut more]

normd,
Welcome to the cnc disease. There are a bunch of others in the area who are doing conversions or have machines.
Your price was definitely right!
What are the problems with the Dynapath?
What kind of parts do you have in mind for your new toy?
Cutmore

[NEATman]

Normd-
Glad to meet another local CNC addict here in Southern NH. I'm working on planning yet another get together. It most likely won't be until May, but you are welcome to attend. It is usually held near Manchester. Send me a private message if you would like to be on the e-mailing list.

NEATman