| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mentors & Apprentice Locator Looking for mentors and/or for apprentices in your own locality please post your info. Do not post any personal info address, phone numbers etc. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-10-2005, 10:56 PM
| ||||
| ||||
am building first machine - have z axis ( of sorts) done need to put drive electronics off breadboard and onnto pccboard or get the componentts for 3 axis onto a pcb .. also need to make the breakout board . i think i need to try the computer for control instead of moving from ground and off and playing with potentiometer for speed.    |
|
#2
09-09-2005, 10:10 AM
| ||||
| ||||
| I have a CNC and am in the Orlando area. I also have electronics experience, I made my controllers from scratch, and make PCB's on the mill. e-mail me at njansen1@gmail.com if you'd like to check it out one day..... |
|
#3
06-06-2006, 07:06 AM
| ||||
| ||||
| hey Neil .. i finally bought one -- it's not too big a deal but i could probably improve it to make it decent .. like increase Voltage for more IPM ... get some anti- backlash going with lower TPI -- (more speed and accuracy) - make an aluminum Z axis to replace the mdf ... etc ... |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
