I live in arcadia so right near you from my guess. Lived in welcome, germanton, and on jonestown so I know winston very well. I'm also a musician and have done some instrument parts on my mill. I've been cncing for about 11 years or so for a living up until last year when I stepped away from it as a full time job for a while. My mill has been broke down for about a year and I hope to get it working again by this summer sometime. I just completed building a router thats located near high rock lake so at least i'm back in the game. Anyway I do 2d and 3d cad and cam programming so I know the ropes fairly well. If I can help you get started or just get over any humps give me a buzz. Good luck.