Help Setting up 4th rotary axis with Gecko 540, Mach3 and Vectric VCarve Pro

[rdlambert1]

Would prefer to speak to someone than try to play message tag. Feel lost on this one. I live in the St Louis Mo. area.

Similar Threads:

• Need Help!- Vectric VCarve Pro - Embossing Dies - V-Carve toolpath problem
• Vectric Aspire or VCarve Help
• Vectric VCarve Pro / Cut2D Toolpath Transform Operations
• Need Help!- Anybody here use Vectric VCarve?
• Vectric Vcarve Pro 4.0 Tips & Tricks