I have a few machines. Started a project with another machinist and the details just didn't work out.

I have a Grizzly g0602 Lathe converted to CNC thats 95% operational (has a few misc tuning things left).

Also, a Grizzly g0704 mill. Conversion to CNC started, but an improper machined part along with poor vendor support has left the conversion stalled. An machinist could fix the part on my lathe, I simply do not know how to correctly hold the part in the lathe without damaging it.

I have other machines as well, including a small CNC router table (about 12x10"), a central machinery combo lathe mill, and some smaller emco manual lathes. Also, a anodizing line is nearly complete....

Looking for someone to help complete the conversion on the mill, along with the remaing tuning on the lathe...and then work on training me to use this stuff.....Cam programing, tooling, setup, etc.

Please send inquires to eddieo@teambrood.com

Similar Threads: