#4 JIC porting dimensions

[saymo]

all, can someone point me in the direction of porting dimensions for a #4 JIC 37 degree port

have spent the last 2 hours looking ....

[Runner4404spd]

http://www.superiordesignconcepts.com/saeport.html

here is the link. these are really put in with a porting tool. i have all the porting tools on hand so if you need a few parts done let me know.

[mjrandle]

The above link is for an O-ring boss port while 37 degree JIC is a tube end connection. You could purchase the SAE J514 standard from www.sae.org or track down the SAE Handbook in the reference section of a university library.


Cheers,

Mike