Looking for solid models of a couple of threadforms


Results 1 to 4 of 4

Thread: Looking for solid models of a couple of threadforms

  1. #1
    Registered
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    130
    Downloads
    0
    Uploads
    0

    Default Looking for solid models of a couple of threadforms

    Hi, does anyone have a cad model of a bit of 9/16"-18 thread, and AN or (SAE AS5194) male fluid connections? I haven't been able to find such anywhere, and it would help me greatly. 2d drawings with dimensions would work just fine too.

    Regards,

    Jim

    Similar Threads:
    No time to do it right, plenty of time to do it twice.


  2. #2
    Community Moderator wendtmk's Avatar
    Join Date
    Dec 2005
    Location
    USA
    Posts
    591
    Downloads
    0
    Uploads
    0

    Default

    Have you looked on the McMaster-Carr web site? Many times they'll have a CAD drawing of the part on the part's page. I've scarfed up a bunch of bolt and other part drawings this way when I was designing my machine.

    Mark



  3. #3
    Registered
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    130
    Downloads
    0
    Uploads
    0

    Default

    That was the first place I looked

    No time to do it right, plenty of time to do it twice.


  4. #4
    Registered
    Join Date
    Apr 2005
    Location
    bih
    Posts
    462
    Downloads
    0
    Uploads
    0


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking for solid models of a couple of threadforms

Looking for solid models of a couple of threadforms